manualshive.com logo in svg

Bernina 765 SE, Manual

Share
Download
Bernina 765 SE Manual Download Page 65

Setup Program

66

>  Touch the icon «Confirm» to delete all data on the BERNINA USB Stick (Optional accessory).

Calibrating the Buttonhole foot No. 3A

The Buttonhole foot No. 3A is calibrated to this machine and they should only be used both together.

Prerequisite:

•  The Buttonhole foot with slide No. 3A is attached.
•  The needle is not threaded.

>  Touch the icon «Setup Program».

>  Touch the icon «Machine settings».

>  Touch the icon «Maintenance/Update».

>  Touch the icon «Calibrate the Buttonhole foot with slide No. 3A».

>  Touch the button «Start/Stop» to start the calibration.

Updating the machine Firmware

NOTICE

BERNINA USB stick (Optional accessory) has been removed too early

Firmware has not been updated and the machine cannot be used.
>  Remove the BERNINA USB stick (Optional accessory) only after the update has been completed 

successfully.

The latest firmware of the machine and a detailed step-by-step instruction for updating processes can be 
downloaded at 

www.bernina.com

. In general, personal data and settings are automatically transferred 

during a firmware update. For reasons of safety, it is also recommended to save data and settings on a 
BERNINA USB stick (Optional accessory) before the firmware update is started. If personal data and settings 
should get lost during a firmware update, they can be transferred to the machine again afterwards.
>  Insert the BERNINA USB Stick (Optional accessory), FAT32 formatted, providing the latest software version 

into the port.

>  Touch the icon «Setup Program».

>  Touch the icon «Machine settings».

>  Touch the icon «Maintenance/Update».

1017815.0.04_2016-05_Manual_B765_EN

Summary of Contents for 765 SE









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands