Creative embroidering
159
> Touch the icon «Embroidering».
> Touch the icon «Basting» to embroider basting stitches along the embroidery motif.
> Touch the icon «Basting» again to embroider basting stitches along the embroidery hoop.
> Touch the icon «Basting» again to deactivate the basting stitches.
Moving the hoop
If the embroidery motif is so big that repeated rehooping is necessary, the embroidered motif can be moved
again.
> Select the embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Move the hoop».
> Turn the «Upper Multifunctional knob» to move the hoop horizontally.
> Turn the «Lower Multifunctional knob» to move the hoop vertically.
Embroidery sequence control when thread breaks
When the thread breaks, the needle can be repositioned in the embroidery motif by means of the
embroidery sequence control.
> Select the embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Embroidery sequence control when thread breaks».
– In the left section of the display a compact view of the embroidery motif is displayed. On the right side
the enlarged embroidery motif is displayed.
> Select the desired position in the compact view using the touchscreen pen or the finger.
> Turn the «Upper Multifunctional knob» to move the hoop stitch by stitch.
> Turn the «Lower Multifunctional knob» to move the hoop in large steps.
> Touch the icon «0-9» to select the desired stitch by entry.
Cutting connecting stitches
The function is activated by default and the connecting stitches are cut automatically. When the function is
deactivated, the connecting stitches between the embroidery motifs must be cut manually.
> Select the embroidery motif.
> Touch the icon «Embroidering».
> Touch the yellow-framed icon «Cutting connecting stitches» to deactivate the function.
0-9
0-9
1017815.0.04_2016-05_Manual_B765_EN
Summary of Contents for 765 SE
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
