Embroidering preparation
140
> Loosen the fixing screw of the needle using the screwdriver gray Torx.
> Pull the needle down.
> Hold the new needle with the flat side to the back.
> Insert the needle as far as it will go.
> Tighten the fixing screw using the screwdriver gray Torx.
Selecting the embroidery needle in the User Interface
After having changed the needle, it can be checked whether or not it is suitable to be used together with the
selected stitch plate.
> Touch the icon «Needle/Stitch plate selection».
> Select the attached needle.
– If the selected needle is suitable in combination with the stitch plate, sewing can be started.
– If the selected needle is not suitable in combination with the stitch plate, starting the machine is
automatically prevented.
Selecting the needle type and the needle size
Convenient memory function: To prevent a loss of information, the needle type and the needle size can be
saved additionally on the machine. The saved needle type and the saved needle size can be checked at any
time.
> Touch the icon «Stitch plate/Needle selection».
> Touch the icon «Needle type/Needle size».
> Select the needle type (1) of the inserted needle.
1017815.0.04_2016-05_Manual_B765_EN
Summary of Contents for 765 SE
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
