Bernina 765 SE Manual Download Page 68

Page: 68 / 200

Setup Program

Checking the firmware version

Both the firmware and the hardware version of the machine and the attached embroidery module are
displayed.
> Touch the icon «Setup Program».

> Touch the icon «Machine settings».

> Touch the icon «Information».

> Touch the icon «Firmware and hardware information».

Reviewing the total number of stitches

The total number of stitches of the machine as well as the number of stitches since the last service carried
out by the specialized BERNINA dealer are displayed.
> Touch the icon «Setup Program».

> Touch the icon «Machine settings».

> Touch the icon «Information».

> Touch the icon «Firmware und Hardware Informationen».

Registering details of the dealer

The contact details of your specialized BERNINA dealer can be registered.
> Touch the icon «Setup Program».

> Touch the icon «Machine settings».

> Touch the icon «Information».

> Touch the icon «Dealer details» to enter the information of the specialized dealer.

1017815.0.04_2016-05_Manual_B765_EN

Summary of Contents for 765 SE









































































































































































































Search results

Summary of Contents for 765 SE

Reviews:

Brands by name

Popular brands

Bernina 765 SE, Manual

Search results

Summary of Contents for 765 SE

Reviews:

Brands by name

Popular brands