Practical stitches
102
6.19 Sewing flat joining seams
The flat joining seam is especially suitable for or thick materials such as terry cloth, felt and leather.
> Attach the Reverse pattern foot No. 1C.
> Touch the icon «Practical stitches».
> Select the Stretch overlock No. 13.
> Overlap the fabric edges.
> Sew along the fabric edge.
> The needle stitches over the edge of the top layer on the right side into the bottom layer to get a very flat
durable seam.
6.20 Sewing basting stitches
When sewing basting stitches, it is recommended to use a fine darning thread as this is easier to remove.
With the Basting stitch No. 21 only every fourth stitch is sewn. The longest stitch possible is 24 mm when the
stitch length is set at 6 mm. The recommended stitch length is 3.5 – 5 mm. The basting stitch is suitable for
sewing projects where a very long stitch length is required.
> Attach the Reverse pattern foot No. 1C/1D.
> Touch the icon «Practical stitches».
> Select the Basting stitch No. 21.
> Select the stitch length.
> Pin the fabric layers at a right angle to basting direction to prevent the layers from slipping.
> Sew 3 - 4 securing stitches at the begin and at the end.
1017815.0.04_2016-05_Manual_B765_EN
Summary of Contents for 765 SE
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
