6
isoLR275_D00127_00_M_XXEN/07.2018
1. Safety instructions
1.1
Intended use
The ISOMETER® is intended for:
Monitoring the insulation resistance of IT systems
Use which deviates from or is beyond the scope of these technical specifica-
tions is considered non-compliant. The Bender companies shall not be liable
for any losses or damage arising therefrom.
Intended use also implies:
Compliance with all information in this operating manual and
Compliance with any test intervals.
1.1.1
Personnel
Only appropriately qualified personnel may work on the ISOMETER®. Qualified
means familiar with the installation, commissioning and operation of the pro-
duct and with training appropriate to the work. Personnel must have read and
understood the safety section and warning information in this operating
manual.
1.1.2
Hazards when handling the ISOMETER® isoLR275
The ISOMETER® is constructed according to the state-of-the-art and the recog-
nised technical safety rules. Nevertheless, when it is being used, hazards may
occur to the life and limb of the user or third parties or there may be adverse
effects on the ISOMETER® or on other valuable property. Only use the
ISOMETER®:
As intended
In perfect working order
Any faults which may impair safety must be eliminated immediately. Imper-
missible modifications and the use of spare parts and additional devices
which are not sold and recommended by the manufacturer of the devices
may cause fires, electric shocks and injuries.
