Belden Grass Valley GV Korona, User Manual

Page: 99 / 433

99
Kayenne/Karrera/GV Korona
User Manual
forces the graphic to full raster, ignoring the key. The Key Off button is inactive for Global
channels.
Easy Cube Control
When a channel is used to create a cube or slab, turning on the Easy Cube button iDPM,
Transform menu automatically translates the delegated channel to the visible face of the
shape as it is rotated in space.
Transform Controls
The Source and Target transform controls below the delegation matrix delegate what 3-D
transformation will be controlled with the soft knobs or pop-up keypad entry. Selecting
one of the transform buttons activates the soft knobs on the right side of the Menu Panel to
control specific parameters of that transform and delegates the Path Control pane to that
transform.
The transform controls are organized on the menu according to Source and Target space
capabilities.
The Locate, Locate Axis, Target Rotate, and Spin transforms can be assigned to work in
either source or target space with the select buttons at the lower-left of their pane.
Selecting the Source button provides image adjustment using that channel’s coordinate
system for reference. Selecting the Target button provides image adjustment using the
screen as the reference. Only one space button is selectable at a time.
Crop Controls
The Crop On button located in the Crop pane, right side of the iDPM, Transform menu, is
used to activate the crop feature for the delegated keyer (this button is inactive for Global
channels). The Crop Edge data pad delegates the soft knobs to control each side’s cropping,
while the Crop Softness data pad delegates edge softness control.
Reverse Controls
The Reverse controls are located to the left of the Crop pane, in the iDPM, Transform menu.
The front and back sides of the transformed picture can be reversed vertically and/or
horizontally with these controls.
Path Controls
The path control pane is located at the top-right of the iDPM, Transform menu. S Linear,
Linear, and Curve interpolation select buttons are available. When Curve is selected, soft
knob controls for Tension, Continuity, and Bias soft knob become available. You can also
turn off transform interpolation and hold each keyframe’s values with the Path Hold select
button.
Note: Target Rotate displays only Target Rotate transform parameter
values, even when Source space is selected. The soft knobs still adjust
either the Target or Source space rotation parameters, however.