Belden Grass Valley GV Korona, User Manual

Page: 258 / 433

258
Device Control
Learn R-MEMs from the Control Panel
Once this assignment has been made, recalling an E-MEM register in the Master E-MEM
Module will recall that same number R-MEM register. Learning an E-MEM register in the
Master E-MEM Module will also learn the same R-MEM register.
Learn R-MEMs from the Control Panel
When R-MEM has been assigned to an E-MEM Enable button, learns can be performed from
the Control Panel as well as the R-MEM menu.
1 On the Master E-MEM Module, select the Enable button to which R-MEM has been
assigned. This enables R-MEM for the current effect register.
2 Setup the desired R-MEM state.
a Go to the R-MEM Router Select menu (accessed via Router, Control) and select the
router source to be used with each switcher source.
b Go to the R-MEM menu (select the R-MEM category selection button) and enable
the desired switcher sources. Select Auto Recall if you want the ability to recall R-
MEM settings for only the selected switcher sources.
CAUTION: : Make sure the R-MEM enable group you choose is only
enabled when you actually need to use it during effect recalls.
Confusing source selection button changes can occur
otherwise. Using E-MEM Auto Recall can help control when
groups are enabled.
Note: The Learn operation you will use erases any existing information
in all the enabled levels of the current E-MEM register.