Belden Grass Valley GV Korona, User Manual

Page: 138 / 433

138
Switcher Control
Macro Button Function Summary
Karrera Control Panel Macro Buttons
Macro Button Function Summary
The Macro button on the Control Panel, (one per Source Select area) delegates keyer source
select button Rows 1 and 2 for macro operations and reports that macro mode is active
(MCR appears in the bus display). To delegate one bus row for macro operations, press and
hold down the Macro button, then press a bus delegation button for the row to be
delegated. MCRO appears in the bus display reporting that the row is active for macro
operations. Macro names, when displayed, will also appear on the bus row(s).
For information about the Pre-Attached (Pre button), Post-Attached (Post button), and
Replacing (Replace button) attached macros, see Macro Attachments on page 162.
The Att Enable button enables and disables all macro button attachments globally. When
on, pressing Control Panel buttons with macros attached will run those macros. When off,
macros can only be played back by activating macro mode and pressing the macro register
buttons, or with the Macro menu.
The Show (Attach) button activates a mode that low tally blinks Control Panel buttons that
have macros attached.
The Delete button activates macro Delete mode. When delete mode is on, pressing a macro
button deletes the macro associated with that button.
When macro mode is on, pressing the Replace button activates attach mode. You then
select the macro register of the desired pre-defined macro and press the button to which
you wish to attach that macro.
During a macro recording, time delays can be inserted into macros. The Ins Delay button
activates macro Insert Delay mode. In this mode the macro delegated M/E’s source name
displays show time durations which can be selected by pressing the corresponding keyer
buttons.
The Record button activates or terminates macro Record mode. In this mode, you select the
macro register into which you wish to record, using the delegated keyer row, perform the
desired actions, and then finish the recording by either pressing the Record button again or
pressing the newly recorded macro register button.
Record a Macro
1 Turn on Macro record mode by pressing the Record button.
2 Press the macro delegated row button of the desired macro register. Use the Shift
button to access shifted macro registers.
3 Perform the steps you wish recorded into the macro, in the order they are to be
performed, using the Control Panel and/or the menus.
4 Complete the recording by pressing the Record button, or pressing the keyer row
macro button.
Insert a Macro Delay
While recording a macro, press the Ins Delay button then press the keyer source select
button of the desired delay time. The 2nd Shift button (3rd and 4th are undefined for this