Belden Grass Valley GV Korona, User Manual

Page: 90 / 433

90
Video Mix/Effects
About Acquiring DPMs
• D elete all for this Suite - Clears all the settings for all the keyers on all the M/E buses to
default, and removes Source Memory from all the keyers.
• Cancel - Exits the Source Memory window without making any changes.
Learn Source Memory from the Control Panel
In addition to the GV Switcher menu, Source Memory can be saved from the Select Module
on the Control Panel.
1 Press a Keyer bus source button on the Source Select Module.
2 Select keyer settings; Preset Pattern, Chroma, keyer mask, wipe, etc.
3 Press and hold a Source Select Keyer delegate button (for example Key 1) for the M/E.
4 Press the EMEM button on the Source Select Module.
Result: Settings for the selected keyer source are learned in Source Memory and a
horizontal line appears through the selected source’s OLED indicating Source Memory has
been learned.
Changes to keyer source settings with Source Memory learned do not auto-update. If you
make a change, you must repeat the steps above to learn Source Memory.
Source Memory can only be deleted from the GV Switcher menu. Go to the Keyer, Mode
menu.
K-Frame Keystores each have Source Memory.
About Acquiring DPMs
iDPMs and eDPMs are currently available on all K-Frame systems with a license. 2D-DPMs
are standard on all K-Frame systems.
iDPMs and eDPMs are floating resources available to any full M/E (not available to the
Controller M/E (ME-CT)). The number of licensed iDPMs in a suite appear in the Logical
Resources of the Eng Setup, Acquire Resources menu, in the
DPM Chns data pad. eDPM
resources must be allocated.
To move resources between suites, refer to the K-Frame Kayenne/Karrera/GV Korona
Installation & Service Manual .
Acquire an M/E Resource for eDPM
A full M/E used as an eDPM logical resource will be dedicated and unavailable until
released.
1 Select Eng Setup , Acquire Resource .
Note: 2D DPMs are available on all M/Es including the Controller M/E and
eDPM.