Belden Grass Valley GV Korona, User Manual

Page: 407 / 433

407
Kayenne/Karrera/GV Korona
User Manual
ClipStore Trim and Remove
Material can be removed from the head of a clip to a mark-in point and from a mark-out
point to the end of a clip. Both operations can be performed on a single clip.
Trim Clip operations include:
• Setting only the mark-in point, and selecting the Trim Clip button—the clip will be
trimmed from the beginning of the clip to the mark-in point.
• Setting only the mark-out point, and selecting the Trim Clip button—the clip will be
trimmed from the mark-out point to the end of the clip.
• Setting both a mark-in and mark-out point, and selecting the Trim Clip button—the
clip will be trimmed on both ends (beginning of clip to mark-in and mark-out to end of
clip).
To enter the mark-in/mark out points, either jog, shuttle, or play to the desired frame and
select the
Mark In/Out button or select the Mark In/Out data pad and enter the mark-
in/out point in the pop-up keypad, and select Enter.
Make Sub-clips from the Current Clip
A sub-clip can be created from the current clip with mark-in and mark-out values (or
without and the clip length will be the same as the original) or split into two sub-clips.
1 To enter the mark-in/mark out points, either jog, shuttle, or play to the desired frame
and select the Mark In/Out button or select the Mark In/Out data pad and enter the
mark-in/out point in the pop-up keypad, and select Enter .
2 Select the Make Subclip(s) button.
3 Enter a clip name or accept the provided name (appends _a) and select Enter —a new
sub-clip with the trimmed length is created.
When making a split clip, the first clip is created from the current clip head to the split mark
point, the second from the split point to the clip end.
Split One Clip into Two Sub-Clips
1 Either jog, shuttle, or play to the point in the clip where you want to split the clip and
select the Mark Split button, or
2 Select the Mark Split data pad (below Mark Split button) and enter the value for the
split point in the Mark Split Point pop-up keypad, and select Enter .
3 Select the Make Subclip(s) button—the Name First sub-clip pop-up keyboard is
displayed.
Note: Trim Clip to mark-in, trims up to the mark point in the clip so the
marked frame is the first frame of the new sub-clip.
CAUTION: Trim Clip from the mark-out point, trims (removes) the marked
frame and trims to the end of the clip so the frame at the mark
point will not be part of the new sub-clip.