Belden Grass Valley GV Korona User Manual Download Page 373

Page: 373 / 433

373

Kayenne/Karrera/GV Korona

User Manual

8 That movie will now be loaded in that Image Store channel, and will also appear in the

pane on the left. The movie can immediately be cued and played if desired.

Name a Movie

A movie can be named after it has been recorded.

1 Go to the Movie Record menu.

2 Select the Change Description button.

3 Enter a name for the movie.

Select a Thumbnail

When a movie is recorded a default thumbnail is created for that movie. If you wish to
change the thumbnail, do the following.

1 Go to the Movie Edit menu.

2 Cue the movie to the desired thumbnail frame.

3 Select

Mark Thumbnail

. The thumbnail will change and the timecode of that location

will be displayed.

Summary of Contents for Grass Valley GV Korona


















































































































































































































































































































































































































































Search results

Summary of Contents for Grass Valley GV Korona

Reviews:

Brands by name

Popular brands

Belden Grass Valley GV Korona, User Manual

Search results

Summary of Contents for Grass Valley GV Korona

Reviews:

Brands by name

Popular brands