manualshive.com logo in svg

Belden Grass Valley GV Korona, User Manual

Share
Download
Belden Grass Valley GV Korona User Manual Download Page 396

396

Advanced Operations

Set Network and Sharing Settings

Set Network and Sharing Settings

Click to select the following in order:

1 Windows 

Start

, 

Control Pane

l,

2

Network

 

and Sharing Center

,

3

Choose homegroup and sharing options

,

4 Change advanced sharing settings...,

5

Turn off network discovery (

radio button),

6

Turn off password protected sharing (

radio button), and 

7

Save Changes

.

ClipStore

With the seamless integration of the K2 Summit/Solo technology into the Image Store 
menus, you can record and play clips with audio. The Summit provides four Video/Key 
channels while the Solo provides two.

See the 

K-Frame/GV K-Frame X Installation & Service Manual

 for engineering configuration 

information.

• The ClipStore is supplied to record and playback with AVC-Intra 100 or DVCPRO HD 

compression format. Clips imported in DVCPRO HD, DVCPRO 25/50, DV, and MPEG-2 
will play natively.

• The ClipStore supports embedded audio only. The AES inputs and outputs are not 

used.

The ClipStore is completely configured and controlled from the GV Switcher menu and 
control panel. There is no need to use the built-in AppCenter Elite software. In fact, if 
changes are made to the ClipStore using AppCenter, they will be overwritten by the 
switcher the next time it sends a configuration to the ClipStore.

This highly integrated solution provides several powerful features, including:

• Fast access to clips and folders,

• Large  storage  capacity,

• Non-volatile memory—no loss of images due to power failure,

• Clip control from the GV Switcher Menu Panel and clip stack control from the GV 

Switcher Control Panel,

• ClipStore device controls (including macros and cues) are E-MEMable, and 

• Make sub-clips from clips and build composite clips with audio.

Summit/Solo Software Version

The latest version of the AppCenter Elite software is available on the GV Switcher Software 
Download site. 

Note:

To change the Summit IP address, see the Installation & Service 

Manual for your switcher model.

Summary of Contents for Grass Valley GV Korona


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands