CHAMELEON® ARCH SERIES
40
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL526
Installation
Additional Options: Foam Pods
Tri-Mounted Single Foam Pod
Note:
If you have selected the single foam pod tri-mount kit, read through the previous section
first to get the driver side and passenger side foam pod assemblies mounted to the
Chameleon Arch. Then proceed to follow through the section below.
1) Locate the remaining single foam pod tri-mount components.
2) Secure the mount bars and the shim plates on top of the front pendant cover using the
supplied 1/4-20 bolts, lock washers, and flat washers. Do not tighten the bolts yet. Use
the images below for more detail.
Note:
You will need to remove the 1/4-20 button head screws and the white plastic caps at this
time if you have already mounted the front pendent cover.
3) Locate the foam pod cross brace, the 3/8-16 bolts, the 3/8
” (9.52 mm) flat washers, and
the 3/8
” (9.52 mm) lock washers. Mount the cross brace to the top mount bars as shown
in the images below. At this time you can tighten all of the 1/4-20 and the 3/8-16 bolts.
4) Mount the foam pod angle to the foam pod cross brace using the two, 3/8-16 button
head fasteners. Tighten the fasteners down.
After
Before
After
Before
After
Before
