CHAMELEON® ARCH SERIES
30
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL526
Installation
Utility Arch Filler Strips
1)
Finish installing the remaining sections of filler strips onto the Arch as shown in the
images below
.
Arch Final Assembly
1) Place the back section of the Arch pendant cover through the welded studs on the back
of the head beam. The front cover will sit recessed inside of the back cover.
2) Use the supplied flat washers and hairpin clips to secure the back section of the pendant
cover as shown below.
Note:
Above image shows Oval Pendant.
!!IMPORTANT!!
Each LED Neon Utility Arch Filler Strip Kit is shipped with 2 extra filler strips
at 32-5/8
”
(82.9 cm) with no slots. If you have not purchased one of the
following Belanger® LED Neon Arch Add-On Options, (Single Foam, Triple
Foam, Single Foam Tri-Mounted, Rain Arch, Single K-Nozzle or Dual K-
Nozzle), you can install all the filler strips at this point. You should have 2
filler strips at 32-58
”
(82.9 cm), with slots, left over. DO NOT discard them!
If you have purchased one of the following Belanger® Led Neon Arch Add-
On Options, (Single Foam, Triple Foam, Single Foam Tri-Mounted, Rain Arch,
Single K-Nozzle or Dual K-Nozzle), the instructions for mounting the filler
strips are in those sections.
After
Before
42-13/16
”
(1.09 m)
32-5/8
”
(82.9 cm)
32-5/8
”
(82.9 cm)
32-5/8
”
(82.9 cm)
32-5/8
”
(82.9 cm)
34-1/8
”
(86.7 cm)
34-1/8
”
(86.7 cm)
42-13/16
”
(1.09 m)
