EN
Installation and operating manual
DRYPOINT
®
M eco control
57
11. Dismantling and disposal
11.1. Warning notices
NOTE
Inappropriate disposal!
Inappropriate disposal of parts and components, operating and auxiliary materials as well as
cleaning media can cause environmental damage.
• Dispose of all parts and components, operating and auxiliary materials as well as
cleaning media professionally and in accordance with regional legal provisions,
regulations and requirements.
• In case of uncertainties regarding disposal, always consult a regional waste management
company.
At the end of its useful life, the product must be disposed of properly e.g. by a specialist company. Materials such as glass,
plastics and some chemical compounds are mostly recoverable, reusable or recyclable.
11.2. Disassembly
Preparatory tasks
1.
1.
Depressurise the device and secure against pressure being applied again.
Depressurise the device and secure against pressure being applied again.
2.
2.
De-energise the device and secure it against being switched back on again.
De-energise the device and secure it against being switched back on again.
Remove the mains plug.
Remove the mains plug.
A “click” noise indicates the opening of the solenoid valve., which makes pressure drop in the device possible.
A “click” noise indicates the opening of the solenoid valve., which makes pressure drop in the device possible.
Disassemble the drying system in the reverse order to assembly.
11.3. Disposal of components
Mechanical, electrical and electronic components must not be disposed of via municipal waste disposal companies or
household waste. At the end of its useful life, the product must be disposed of properly e.g. by a specialist company.
• All associated parts and operating media must be disconnected on the
DRYPOINT
®
M eco control
and disposed of as
special waste.
•
Used filter element:
Waste code: 150203
Adsorption and filter materials; cleaning wipes and protective clothing with the exception of those classified by
150202
•
Used float drain:
Do not dispose of as household waste! Disposal must be executed as professional and environmentally sound.
11.4. Preparation for return dispatch
If the
DRYPOINT
®
M
eco control
is disassembled and prepared for dispatch, remove all residual liquids completely to avoid
the condensate flowing back into the membrane. Only transport and ship the product without substances that can pose a
health threat or are an environmental hazard.
