EN
Installation and operating manual
DRYPOINT
®
M eco control
17
2.9. Technical data
Technical data
DEC 1-30S
DEC 2-40S
DEC 3-60S
DEC 4-80S
DEC 5-115S DEC 6-135S DEC 7-165S DEC 8-250S DEC 9-330S
Installation size
DRYPOINT® M plus
10-41
10-47
20-48
20-53
20-60
20-67
40-61
40-75
40-90
Min./max. working
pressure
4 ... 10 bar(g)
Excess pressure
protection housing
Pressure compensation plug
Min./max.
storage/transport
temperature
+2 ... +50 °C, frost-free
Min./max. Ambient
temperature
+2 ... +50 °C, frost-free
Min./max. media
temperature
+2 ... +50 °C, frost-free
Medium
Fluid group 2: Compressed air/nitrogen
Medium and quality at
membrane dryer inlet
Only neutral medium in accordance with PED 2014/68/EU with Class [3: - :3] ISO 8573-1
Noise level
<< 45 dB (A), no expansion pop
Installation position
Vertical
Weight [kg]
3.4
3.6
4.9
5.2
5.5
5.8
10.9
12.0
13.1
Materials
Media-contacting parts as corrosion-proof
Materials conforming to RoHS and REACH regulations
Plastic components conforming to UL regulations
Integrated nanofilter
0.01 µm / 0.005 mg/m³
Pressure loss
0.1 - 0.3 bar, depending on the compressed air volume flow
PDP outlet settings
+10 / +7 / +5 / +3 / 0 / -5 / -10 / -15 / -20 / -26 °C
PDP difference settings
10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 / 55 K (Kelvin)
Electrical data
Operating voltage
95 ... 240 VAC ± 10% (50 ... 60 Hz) / 100 ... 125 VDC ± 10%
or 24 ... 48 VAC ± 10% (50 ... 60 Hz) / 18 ... 72 VDC ± 10%
Power consumption
max. 20 VA (W) with permanently closed solenoid valve
Recommended wire cross-
section
min. 0.5 mm²
Recommended connection
cable
2-wired, diameter 5 ... 10 mm
Degree of protection
IP 54
Min./max. contact load
(potential-free contact)
max. 12 VAC / 1 A or 24 VDC / 1 A; min. 5 VDC / 10 mA
Signal output
4…20 mA (PDP outlet)
Interfaces
2 x cable connection M16, cable diameter 5 ... 10 mm
