UniCel DxC 600i In-Lab Training Manual A24574-AD
Page 18
Professional Development Department
October 2010
Function
Buttons
The following Access menu functions can be selected from the Main
Menu or from any screen at the Access monitor using the MENU tab:
Program maintenance and calibration requests at the Access analyzer,
and program/process patients during independent mode operation.
Monitor samples in progress at the Access analyzer and recall results
at the Access analyzer during independent mode operation
Load supplies and load/unload reagents at the Access analyzer
Not used with a DxC 600i system
Configure calibrator lot specific parameters into the Access analyzer
and review calibration information from the Access analyzer
Check/print the temperatures of thermal zones and substrate,
Run/Enable/Disable the Utility assay, and display the System Check
results screen
Initialize, prime and access Device Diagnostics at the Access analyzer.
(Diagnostic functions at the Access analyzer can only be performed
when the CTA is off line.)
Set the system default values and formats, and configure tests
Note: When the Access is operating as part of the DxC 600i system, certain
operating functions are grey (not active) at the Access analyzer. Certain
Diagnostic features are not available when the CTA is online, including Device
Diagnostics, Initialize System, and Volume Check.
Summary of Contents for DxC 600i
Page 2: ......
