Beckman Coulter Avanti J-26S XPI, Instructions For Use Manual

Page: 29 / 88

PN B10093AE
1-9
Description
Specifications
1
Control Features
Operational Features
Specifications Description
Speed • Setting range :
— 100 to 26,000 RPM or equivalent RCF (in 100

g increments)
• Elutriation speed setting range :
— 0 to 5000 RPM (in 10-RPM or 10

g increments)
• Speed display :
— from 0 to 10,000 RPM, display indicates actual rotor speed

10 RPM; from 10,000 to
26,000 RPM, indicates actual rotor speed

0.1%, or equivalent RCF
Speed Control •
Low speed (2000 RPM) control = ±10 RPM
•
High speed (Max/Rotor) control = ±0.1% RPM
Time • Setting range :
—
1 min to 99 hr 59 min,

2
t , or continuous (hold)
•
Actual display :
— Indicates time remaining (timed run),

2
t , or elapsed time (hold run)
•

2
t setting range :
— up to 9.99

10
14
radians squared per second
•

2
t actual display :
—
indicates accumulated centrifugal effect to 3 significant digits (in exponential notation)
Temperature • Setting range:
— –10 to +40°C (in 1°C increments)
• Accuracy :
—
rotor temperature controlled to within

2°C of set temperature (after equilibration)
a
•
Ambient temperature range :
— 16 to 38°C (60 to 100°F)
b
• Cooling fluid :
— refrigerant R452A (HFO)
Acceleration maximum, slow, or timed (1 to 10 min from 0 to 500 RPM)
Deceleration maximum, slow, timed (1 to 10 min from 500 to 0 RPM), or off
a. During transient conditions, such as acceleration and deceleration, rotor temperature may be outside this range. Refer to applicable rotor
manuals for specific rotor operating range information.
b. To reach temperatures above ambient, the centrifuge is dependent on the frictional heat generated inside the chamber during operation.
At low run speeds or low ambient temperatures, the centrifuge may not be able to achieve some higher temperatures.
Specifications Description
Door 6.1-cm (2.4-in.) thick plastic resin with steel plate