Beckman Coulter Avanti J-26S XPI, Instructions For Use Manual

Page: 26 / 88

PN B10093AE
1-6
Description
Controls and Indicators
Setup Screen
The setup screen ( Figure 1.4 ) contains editable fields for parameter entry. The six function keys to
the left of the screen are for selecting parameter fields. The six soft keys to the right of the screen
are used to select options based on which function key is pressed. Guidelines direct the eye from
each function and soft key to the display line controlled by that key. A message line at the bottom
of the screen shows help and diagnostic messages during setup and operation.
Figure 1.4 The Setup Screen
When the centrifuge power is turned on, the setup screen displays the parameters of the last run
performed.
Function Keys
Pressing
ENTER
or another function key saves parameter entries.
TIME • In time mode, indicates the remaining run time in hours and minutes. The TIME
display begins counting down when START is pressed and continues counting down
to 0, when deceleration begins.
• In hold mode, indicates the time elapsed since START was pressed. After 99 hours and
59 minutes the timer will reset to 0 and continue counting elapsed time.
•
In

2
t mode, indicates the user-entered

2
t (accumulated centrifugal force on the
sample) and the calculated time remaining until the

2
t setting is reached.
TEMP°
C Indicates rotor temperature in degrees C. The temperature is displayed to 1 degree and
is within

2 degrees of the set temperature (after temperature equilibrium is reached).
1. Function Keys 2. Message Line 3. Soft Keys
1
2
3