Operation
EK1960
79
Version: 1.3.1
4.4
Info data
4.4.1
Info data for the connection
Info data for connections can be enabled on the
Connection
tab of the alias device.
Fig. 85: Enabling the info data for connections
The info data are shown in the I/O tree structure below the EL6910 in the process image. From here, these
signals can be linked with PLC variables. Further information on the included data can be found in the
documentation for
TwinCAT function blocks for TwinSAFE logic terminals
. Use the checkbox
Show Input/
Output Data as byte array
under
Target System
to adjust the process image.
Fig. 86: Checkbox for the connection info data
Fig. 87: Info data for the connection in the I/O tree structure as byte array
Summary of Contents for EK1960 Series
