Becker CentronicPLUS VC520 PLUS, Assembly And Operating Instructions Manual

Page: 29 / 52

Select the required receiver as described in Se-
lection of the receiver for the setting mode [
}
19].
3s
First press the programming button and, within 1
second, press the
button at the same time and
hold both buttons down for 3 seconds.
▻ The consumer switches ON.
▻ The transmitter confirms by lighting up
the upper third of the LED ring green.
3s
When the required running time is reached, first
press the programming button and, within 1
second, press the
button at the same time and
hold both buttons down for 3 seconds.
▻ The consumer switches OFF.
▻
The transmitter confirms by lighting up
the lower third of the LED ring green.
► The running time is set.
Deleting the running time
Select the required receiver as described in Se-
lection of the receiver for the setting mode [
}
19].
3s
First press the programming button and, within 1
second, press the STOP button at the same time
and hold both buttons down for 3 seconds.
▻ The receiver confirms.
▻ The transmitter confirms with red
pulsing of the LED ring.
► The running time has been deleted.
29 - en