Programming the CentronicPLUS transmitter
Caution
•
Risk of injury due to electric shock.
•
Connection may only be performed by a qualified electri-
cian!
•
The device only offers back-of-hand protection, not
touch protection.
Establish programming mode
Make sure that the required operating mode is selected.
Putting the radio receiver into programming mode by switching on the
power
Switch on the power.
▻
The LED next to the programming but-
ton flashes green and then flashes or-
ange after 3 minutes.
▻
The receiver confirms.
►
The radio receiver remains in programming
mode for 15 minutes.
Putting the radio receiver into programming mode with the program-
ming button
Briefly press the programming button on the radio
receiver.
▻
The LED next to the programming but-
ton flashes green and then flashes or-
ange after 3 minutes.
►
The radio receiver remains in programming
mode for 15 minutes.
16 - en
