Setting/adjusting the maximum tilt (venetian blind
operation)
37].
Move the blind to the lower limit position.
Then move out of the closed position (in setting
mode) in the
direction until the slats of the
venetian blind are completely open.
3s
First press the programming button and, within 1
second, press the
button at the same time and
hold both buttons down for 3 seconds.
▻
The receiver confirms.
►
This saves the tilt of the venetian blind.
Switching actuator operating mode
Connection (drive outputs)
The output
is delivered connected. The direction of rotation can be
changed, see corresponding chapter on changing the direction of rotation.
Function
Operation
Switching on
/
button on the transmitter
Switching off
button on the transmitter
40 - en
