Select the desired channel by pressing the func-
tion key on the multi-channel hand-held transmit-
ter.
or
Press the STOP button to change the assignment
status of the selected receiver. If the receiver is
not yet part of the installation, it will be added and
assigned to the selected channel.
▻
The receiver signals once to confirm
the channel assignment, or signals
twice to cancel the channel assign-
ment.
▻
The transmitter lights up accordingly to
confirm the new assignment status.
►
The receiver is now part of the installation
with the required channel assignment.
3s
Then press the programming button for 3 seconds
to change to normal mode.
►
The LED ring goes out.
18 - en
