Deleting all transmitters (except the master
transmitter)
3s
Press the programming button on the master
transmitter for 3 seconds.
▻
The receiver confirms.
3s
Re-press the programming button on the master
transmitter for 3 seconds.
▻
The receiver confirms.
10s
Re-press the programming button on the master
transmitter for 10 seconds.
▻
The receiver confirms.
►
All transmitters (except the master transmit-
ter) are now deleted from the receiver.
Overwriting the master transmitter
There are two ways to overwrite the master transmitter:
•
Putting the radio receiver into programming mode by switching on the
power
•
Putting the radio receiver into programming mode with the programming
button on the radio receiver
Putting the radio receiver into programming mode by
switching on the power
To ensure that the new master transmitter is programmed in
the desired radio radio receiver only, all other receivers
which are connected to the same power supply must be de-
activated from the programming mode. To do so, after
switching the power back on, execute a
,
or stop com-
mand using the transmitter for the given radio receiver or
press the programming button on the radio receiver.
35 - en
