What to do if...?
Problem
Remedy
Tubular drive/receiver is not re-
sponding.
Insert a new battery/batteries into
the hand-held transmitter.
Make sure the battery/batteries is/
are correctly inserted in the hand-
held transmitter.
Reduce distance from receiver.
Program transmitter.
Check connection.
The LED ring on the hand-held trans-
mitter lights up red when the receiver
for the setting mode is selected.
Reduce distance from receiver.
Check electr. connection of the re-
ceiver.
Put the receiver into programming
mode.
Add the transmitter to the installa-
tion.
Tubular drive is running in the wrong
direction.
Swap the
and
wires at the radio
receiver.
Change the direction of rotation via
the transmitter.
Intermediate positions I/II have
moved.
Set the travel path again and repro-
gram the intermediate positions I/II.
Tubular drive does not operate at the
set switching time.
Changing from Manual to Automatic.
If the slide switch of a Centronic
transmitter is already at , switch it
to then back to .
47 - en
