Setting the travel path with a Centronic
transmitter
Intermediate positions can only be fed back and pro-
grammed once the travel path has been set. A time of
between 1 second and 10 minutes can be set as the travel
path.
The set drive limit positions are not affected by changes to
the programming of the travel path.
Close to the lower limit position.
3s
First press the programming button and, within 1
second, press the
button at the same time and
hold both buttons down for 3 seconds.
▻
The receiver confirms.
Then close to the upper limit position.
3s
First press the programming button and, within 1
second, press the
button at the same time and
hold both buttons down for 3 seconds.
▻
The receiver confirms.
►
The reference route is set.
37 - en
