Manually adjusting the slat position
Settings can only be adjusted using a SWCxxx PLUS hand-
held transmitter.
The receiver must be in blind mode.
Make sure that the maximum tilt is already set; see chapter
Setting/adjusting the maximum tilt (venetian blind operation)
Press and hold one of the two travel buttons until
the required slat position is reached.
▻
The transmitter confirms by the LED
ring filling or emptying yellow.
►
The blind moves to the set slat position.
A filled yellow LED ring indicates a completely
opened blind.
An empty yellow LED ring indicates a completely
closed blind.
Switching actuator operating mode
Connection (drive outputs)
The output
is delivered connected. The direction of rotation can be
changed, see corresponding chapter on changing the direction of rotation.
Function
Operation
Switching on
/
button on the transmitter
Switching off
button on the transmitter
Setting a running time (optional)
In this operating mode, a running time can be programmed in the device. The
radio receiver switches off automatically once the set time has elapsed. The
time can be adjusted up to max. 10 minutes.
28 - en
