3. Set the operating mode as described in the chapter Switching between op-
erating modes [
4. Programme a transmitter into the receiver.
Sample wiring diagram with a 24 V DC tubular drive
1. Connect the device as follows:
BU (1)
24 V
+
BN (2) BK (3) RD (4)
-
C
L L N
µ 3A 110-240V~ µ 3A 30V
2. When the power is switched on, the device confirms by briefly switching in
the UP direction.
3. Set the operating mode as described in the chapter Switching between op-
erating modes [
13].
4. Programme a transmitter into the receiver.
11 - en
