Selection of the receiver for the setting mode
Bring the transmitter as close as possible to the
required receiver.
3s
Press the programming button for 3 seconds. The
transmitter performs a search and the LED ring
continuously changes colour. The transmitter then
switches to receiver selection and selects the re-
ceiver with the best connection quality.
▻
The receiver confirms.
If you do not receive confirmation from the re-
quired receiver, you can press the
/
button to
toggle between the available receivers until the re-
quired receiver confirms. Pressing the
button
for 3 seconds confirms the receiver with the best
connection quality.
▻
The transmitter displays the current as-
signment status of the receiver via the
LED ring.
Assignment status
Lights up yellow:
The receiver is not yet part of the installation or is
in the
as-delivered condition
.
Lights up blue:
The receiver is
not assigned to the selected
channel.
Lights up green:
The receiver is
assigned to the selected chan-
nel.
Lights up white:
Centronic PLUS sensor selected.
Lights up purple
Centronic PLUS transmitter selected.
Lights up red:
No receiver located.
19 - en
