Bayer HealthCare ADVIA 60, Operator'S Manual

Page: 90 / 128

8. INSTRUMENT CONFIGURATION
Page 8/16 075D0002-01
The results are stored under a backup number which corresponds to the index of the results
recorded on the smart card.
Sixty results can be stored on the smart card. When this one is full, the operator must either
replace the smart card with a new one or clear the results from the old smart card.
The graphic results are not recorded on the smart card. NOTE:
NOTE: Results cannot be recorded if the MEMO is OFF.
8.7.3. Running the samples
Place the sample tube in the sample holder and close the door to start the analysis cycle. The
following menu is displayed:
Enter the patient identification and press ENTER . Then, the analyzer checks if a Patient Memory
Card is present.
- If the Patient Memory Card has not been inserted, the following message appears:
Insert the Patient Memory Card and press ENTER .
- If the smart card is not a Patient Memory Card, the following message warns the operator:
Replace the smart card with a Patient Memory Card and press ENTER .
- If the smart card has been introduced in a wrong way
Remove the smart card and insert it with the arrow facing toward the system, and on the upper
side and press
ENTER .
When the smart card is full:
Insert a new one and press ENTER .
When the analysis is completed the results are stored on the smart card, as well as the patient
identification.
PAT ID ? : NO SAVE : ESC
CURRENT SAVE : ENTER
ERROR : NO SMART CARD... NO : ESC
INSERT A NEW CARD YES : ENTER
ERROR : BAD SMART CARD... NO : ESC
INSERT A NEW CARD YES : ENTER
ERROR : BAD CARD INSERTION NO : ESC
INSERT A NEW CARD YES : ENTER
ERROR : MEMORY CARD FULL NO : ESC
INSERT A NEW CARD YES : ENTER