Bayer HealthCare ADVIA 60, Operator'S Manual

Page: 55 / 128

Page 7/1 075D0002-01
7.1. INTRODUCTION
Calibration should be performed upon installation of the ADVIA 60-
CT
Hematology system.
Subsequent recalibration is required if there is a significant shift in control values after replace-
ment of instrument parts, a change in reagent lot number, or whenever indicated by quality control
data.
Calibration can be achieved in two different ways.
1 - Bayer SETpoint Calibrator (B03-4203-51) is used to calibrate the ADVIA 60-
CT
Hematology
System.
Refer to the package insert supplied with the calibrator for instructions for use and assay values
specific to the ADVIA 60 Hematology system used.
2 - Calibration coefficients are known and can be entered directly.
From the MAIN MENU, move the cursor to the function
3
CALIBRATION and press ENTER .
The CALIBRATION menu is displayed :
CALIBRATION 1 AUTO CALIBRATION
HH:MM 2 COEFFICIENTS
NOTE:
Calibration must be performed on a clean and reproducible instrument, blank values
must be within the acceptable limits.
CHAPTER 7. CALIBRATION AND QUALITY CONTROL
BIOHAZARD: Wear personal protective equipment. Use universal precautions. Refer
to Appendix B for recommended precautions when working with biohazardous
materials.