Bayer HealthCare ADVIA 60, Operator'S Manual

Page: 77 / 128

8. INSTRUMENT CONFIGURATION
Page 8/3 075D0002-01
8.1.4. Printer selection
Four different printers and a no printout option can be selected from the RESULTS menu. Move
the cursor to the function
4
PRINTER and press ENTER . The PRINTER menu is displayed:
Move the cursor to the required printer :
- 1 RESERVED 1 : EPSON (80 columns) printer
- 2 RESERVED 2 : STAR printer
- 3 RESERVED 3 : SEIKO (thermal) printer
- 4 STANDARD :
CITIZEN (dot matrix) printer
- 5 NONE
or if no printout is required, move the cursor to the function
5
NONE and press ENTER . In this
last case, results will have to be recorded by the operator from the display at the end of each
analysis.
8.1.5. Temperature printout
The temperature of the diluent during the analysis has to remain in between the specified limits
(18 - 32°C, 65 - 90°F). Results obtained for temperature outside these limits cannot be certified.
When the temperature printout is requested, move the cursor to the function
5
PRINT TEMP
and press ENTER . The TEMPERATURE menu is displayed:
PRINTER > * 1 RESERVED 1
HH:MM 2 RESERVED 2
Move the cursor to the required option and validate. The temperature measured on the diluent
circuit will be printed out on each result (sample and QC results).
PRT. TEMP. > * 1 YES
HH:MM 2 NO