Bayer HealthCare ADVIA 60, Operator'S Manual

Page: 80 / 128

8. INSTRUMENT CONFIGURATION
Page 8/6 075D0002-01
8.2.4. Flag limits
A - Platelet flag adjustment
From the menu CHG LAB LIMITS, move the cursor to the function
4
FLAGS and press ENTER .
The flag menu is displayed:
Move the cursor in front of the flag to be adjusted and press ENTER . The following menu (SCL for
exemple) is displayed :
Enter the flag required value and press ENTER or press ESC to keep the current value. Move the
cursor in front of the next flag and repeat the same procedure. Press the ESC key when all
required values have been adjusted to return to the previous menu.
The factory adjustment values are:
SCL : 8.00
SCH : 8.00
MIC :
8.00
B - WBC morphological flags
These flags have to be adjusted by the user according to the representative population of the
samples to be analyzed. Specialized hospital laboratories may not have the same detection
requirements as outpatient laboratories.
Move the cursor in front of the required flag and press
ENTER . Enter the new flag value and press
ENTER . Press the ESC key when all required values have been adjusted to return to the previous
menu.
The factory adjustment values are:
L1 : 8.00
M2 : 8.00
G1 : 15.00
G3 : 8.00
FLAGS LIMITS > 1 SCL <8.0>
HH:MM 2 SCH <8.0>
SCL : ? EXIT : ESC
ACTUEL : 8.00 SAVE : ENTER
NOTE: The lower the flag value, the higher the triggering sensitivity.