6-14
117237-E Rev.00
NauticaRS 5.5R Reference Guide
Parameter:
bumpdatain
MTC:
bumpdatai
Default:
on-demand-calls
Options:
on-demand-calls, never, always, on-cli,
on-demand-calls-&-cli
Function:
Specifies when to bump, or drop, an incoming data call
to make way for a voice call.
Instructions:
There are several values for this parameter:
•
On-Demand-Calls: If an incoming data call is
using two lines to the same number (one of the lines
is used for extra bandwidth), the second line is
dropped to make way for the voice call. This
happens only if the initial data link is not lost by
bumping the extra line.
•
On-Demand-Calls-&-CLI: If there are two lines
up to the same destination and one of those lines is
an extra bandwidth line, the additional line is
dropped if it matches a Calling Line Identifier (CLI)
number as specified in the CLI1bump (
page 6-15
)
and CLI2bump (
page 6-15
) parameters.
•
On-CLI: If the data calls match a number specified
in the CLI1bump (
page 6-15
) and CLI2bump
(
page 6-15
) parameters, the data call is dropped to
make way for the voice call.
•
Never: A data call is never dropped to make way for
a voice call.
•
Always: A data call is always dropped to make way
for a voice call.
Summary of Contents for NauticaRS
