BayStream 7.3 Documentation Change Notice
115385-D Rev 01
BayStream Multiservice Software Version 7.3
43
Using Site Manager
To use Site Manager to configure a local port prefix, perform the following steps:
Using the Technician Interface
Use the Technician Interface command shown in
Figure 13
to configure a local
port prefix.
Figure 13.
Configuring a Local Port Prefix
Site Manager Procedure
You do this
System responds
1. In the Configuration Manager window,
choose Protocols.
2. Choose Global Protocols.
3. Choose Telnet Server.
4. Choose Global.
The Edit Telnet Server Global
Parameters window opens.
5. At the Edit Telnet Server Global
Parameters window, set the following
parameter:
•
Local Port Prefix
Valid values are 11 through 166.
To disable the local port prefix
feature, set the parameter to 0.
6. Click on OK.
Site Manager returns you to the
Configuration Manager window.
[4:1] $ set wfTelnet.wfTelnetLocPrtPrefix.11
BYS0098A
TI set command
Telnet MIB Entry
value (11 through 166; 0=disable)
attribute identifier