manualshive.com logo in svg

Bay Networks Baystream 7, Notice

Share
Download
Bay Networks Baystream 7 Notice Download Page 122

BayStream 7.3 Documentation Change Notice

106

BayStream Multiservice Software Version 7.3

115385-D Rev 01

 

 Name:

wfFrSwRnniVcRecvFecnFrames

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.45

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of frames received over the interface in which the FECN bit was set.

 Name:

wfFrSwRnniVcRecvFecnOctets

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.46

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of octets in frames received over the interface in which the FECN bit 
was set.

 Name:

wfFrSwRnniVcRecvBecnFrames

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.47

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of frames received over the interface in which the BECN bit was set.

 Name:

wfFrSwRnniVcRecvBecnOctets

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.48

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of octets in frames received over the interface in which the BECN bit 
was set.

Summary of Contents for Baystream 7













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands