manualshive.com logo in svg

Bay Networks Baystream 7, Notice

Share
Download
Bay Networks Baystream 7 Notice Download Page 56

BayStream 7.3 Documentation Change Notice

40

BayStream Multiservice Software Version 7.3

115385-D Rev 01

 

Using Site Manager

To use Site Manager to enable collection of billing information for SVCs and/or 
PVCs on an interface, perform the following steps: 

Using the Technician Interface

To enable billing information collection on an interface, perform the following 
steps:

1.

Use the Technician Interface list command to display interfaces currently 
configured on the BayStream switch (as shown in 

Figure 9

).

Site Manager Procedure

You do this

System responds

1. In the Configuration Manager window, 

choose Protocols.

2. Choose Frame Relay Switch.

3. Choose Interfaces.

The DLCMI Configuration window 
opens.

4. Click on Edit.

The Edit FRSW Interface window 
opens.

5. At the Edit FRSW Interface window, set 

the following parameters:

•

SVC Billing Enable

•

PVC Billing Enable

6. Click on Save.

7. Click on Done.

Site Manager returns you to the 
Configuration Manager window.

Summary of Contents for Baystream 7













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands