manualshive.com logo in svg

Bay Networks Baystream 7, Notice

Share
Download
Bay Networks Baystream 7 Notice Download Page 119

BayStream 7.3 Documentation Change Notice

115385-D Rev 01

BayStream Multiservice Software Version 7.3

103

 

 Name:

wfFrSwRnniVcSetDeFrames

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.33

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of frames sent to the interface in which this switch set the DE bit.

 Name:

wfFrSwRnniVcSetDeOctets

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.34

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of octets in frames sent to the interface in which this switch set the 
DE bit.

 Name:

wfFrSwRnniVcDropNonDeFrames

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.35

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of frames received over the interface that were discarded, excluding 
any frames in which the DE bit was set.

 Name:

wfFrSwRnniVcDropNonDeOctets

 Object ID:

1.3.6.1.4.1.18.3.5.9.6.24.36

Type:

Counter

Access:

Read Only

 Default:

Null

 Description:

Indicates the number of octets in frames received over the interface that were discarded, 
excluding any frames in which the DE bit was set.

Summary of Contents for Baystream 7













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands