Bay Networks 6300, Supplement Manual

Page: 94 / 593

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX
Chapter 3 Configuring the PRI Interface, Global Ports, and Sessions
A-66
Book A
Table A-6. SPB Field Definitions
(continued on next page)
Field Definition
begin_session Marks the beginning of an SPB and names it. The session
name is an alphanumeric string of up to 12 characters. (The
RA 6300 will accept longer strings, but 12 is the
recommended limit.) You can use this string with the CLI
superuser sessions command to display an SPB.
calling_no (Optional) Specifies the telephone number that identifies
the origin of the ISDN call. Specify the entire number,
including the area code, even if it would not normally be
required to make the call. You can use a dash to separate
the area code from the rest of the phone number, or you can
include the area code in parentheses. No wild cards
symbols (*) are permitted and white space is ignored. If
this field is omitted, any calling number is permitted in the
corresponding call SETUP message.
Sometimes, the calling number is not available in the
SETUP information, either because the phone company did
not have the equipment to deliver it or because the caller
keeps his or her number private. If calling_no is specified,
but no number is contained in the SETUP information, the
SPB is not a match.
called_no (Optional) Specifies the number the user entered to dial
into the RA 6300. Specify the entire number, including
the area code, even if it would not normally be required.
You can use a dash to separate the area code from the rest
of the phone number, or you can include the area code in
parentheses. No wild cards (*) are permitted. White space
is ignored.