Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX
Chapter 15 Using RA 6300 Security
A-276
Book A
•
The DHCP client cannot be used to configure the dial-in host.
•
DHCP clients do not use automatic address allocation, which
assigns permanent IP addresses, nor do they retrieve statically
configured IP addresses from the DHCP server.
Cautions
•
If the DHCP client is invoked, but is unable to obtain an address
from a DHCP server, it syslogs the condition “Client did not
receive a DHCPOFFER”; the DHCP client cannot supply an
address to the IPCP, and the remote connection is terminated.
•
It is possible that the DHCP client will be unable to discover a
DHCP server and obtain an IP address from it before the PPP
connection establishment times out and terminates.
Creating the acp_dialup File
The acp_dialup file resides in the RA 6300 install directory. Any ACP
dial-up address request that comes from the RA 6300 includes the
RA 6300 address and port number, and an associated user name, which
are used as keys in this file. Once the keys are matched, the corresponding
dial-up addresses are returned to the caller on the RA 6300. If no match
is found, the RA 6300 uses the port’s remote_address and local_address
(for more details, see
Determining Dial-up Addresses using the acp_dialup
File
on page 15-278).
Summary of Contents for 6300
Page 4: ...Remote Annex 6300 Supplement to the Remote Annex Administrator s Guide for UNIX iv ...
Page 20: ...Remote Annex 6300 Supplement to the Remote Annex Administrator s Guide for UNIX Figures xx ...
Page 24: ...Remote Annex 6300 Supplement to the Remote Annex Administrator s Guide for UNIX Tables xxiv ...
