manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 128

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 6    Point-to-Point Protocol (PPP)

A-100

Book A

•

Set the allow_compression parameter to Y if you want the
RA 6300 to accept compressed packets.

•

Use the supplied defaults for the data_bits (8), stop_bits (1),
and parity (none) parameters.

PPP is an 8-bit protocol. If data_bits is set to 7, and parity
is not set to none, the Remote Annex forces the data_bits
setting to 8 and the parity setting to none. Otherwise, the
RA 6300 syslogs an error message.

•

Set the address_origin parameter to acp so that the RA 6300
requests the endpoint addresses, based on the user’s login,
from ACP.

•

You can leave ppp_mru parameter set to its default.

Sample Configuration for Addressing Using
Asynchronous Port Parameters

Figure A-6

 illustrates a configuration in which a single remote PC is

connected to an Annex through an asynchronous PPP session. The session
is running via a BRI line with a V.120 terminal adapter and the PRI line
to the Annex.

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands