manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 384

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 1    Network Administration

B-18

Book B

Table B-5. Field Definitions for the netstat –ip Command (continued)

Field

Definition

Possible local states for PAP security:

Initial

No PAP security has been initiated.

AREQ received

The RA 6300 has received the Authenticate-Request
message and currently is processing it.

ANAK sent

The RA 6300 has rejected the peer’s Authenticate-
Request; the link will be coming down.

AACK sent

The RA 6300 has authenticated the peer.

Possible remote states for PAP security:

Initial

No PAP security has been initiated.

AREQ sent

The RA 6300 has sent the Authenticate-Request
message and is waiting for the response.

ANAK received

The RA 6300’s Authenticate-Request has been
rejected by the peer; the link will be coming down.

AACK received

The peer has authenticated the RA 6300.

Possible states for CHAP security:

CHAP AACK Rcvd

CHAP Authentication Acknowledged Received.

CHAP AACK Sent

CHAP Authentication Acknowledged Sent.

CHAP CHAL Rcvd

CHAP Challenge Received.

CHAP CHAL Sent

CHAP Challenge Sent.

CHAP RESP Rcvd

CHAP Response Received.

CHAP RESP Sent

CHAP Response Sent.

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands