manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 214

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 12    AppleTalk

A-186

Book A

Table A-18. AppleTalk-specific RA 6300 Parameters

Since AppleTalk uses dynamic addressing, AppleTalk addresses are
acquired at boot time. The a_router, zone, and node_id parameters
are hints for the RA 6300 to use at start-up. If another AppleTalk node
is using an address defined as a hint, the RA 6300 chooses a different
address. The stats command displays the run-time values for these
parameters.

a_router

The Ethernet address of the network’s A_Router. The RA 6300 uses this
value as a hint at start-up. When a Routing Table Maintenance Protocol
(RTMP) message arrives from this Ethernet address, the RA 6300 gleans
the AppleTalk DDP address from the packet and tries to talk to the
AppleTalk router. The address is a hexadecimal Ethernet address, e.g.,
00-7F-12-33-44-55. The default is 00-00-00-00-00-00.

Parameter

Default

Description

a_router

00-00-00-00-00-00

The Ethernet address of the
network’s A_Router.

default_zone_
list

""

This zone list is sent to ARAP
clients as the local back-up to ACP.

node_id

0.0

The address the RA 6300 tries to
acquire at start-up.

option_key

""

Enables/disables AppleTalk.

zone

""

The AppleTalk zone for use at
start-up.

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands