manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 184

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 11    Internetwork Packet Exchange (IPX) Protocol

A-156

Book A

The

DISABLED MODULES

field displays any software modules that

have been disabled via the RA 6300 disabled_modules parameter.
(See

disabled_modules

 on page C-51.) If this field displays

ipx

, then

IPX is unavailable even if the IPX option_key parameter is set
correctly.

2.

Set the option_key parameter to the value you obtained in Step 1.

In the following example, the option key is set to

RaqbDwv8e

 using

admin:

annex: su
Password:
annex# admin
Annex administration Remote Annex Rx.x, 72 ports
admin: set annex option_key RaqbDwv8e

The option_key value is case-sensitive.

The default superuser password for the RA 6300 is its
IPX node.

3.

Specify the type of IPX frame that the Novell network uses to
encapsulate IPX packets on the Ethernet.

To specify the frame type, set the RA 6300 ipx_frame_type
parameter. Valid values are ethernetII, raw802_3 (the default),
802_2, or 802_2snap. The following command sets the type
to 802_2:

admin: set annex ipx_frame_type 802_2

To determine the frame type the network is using, check the
AUTOEXEC.NCF file on your Novell server or use the Novell file
server console command called PROTOCOL.

4.

Reboot the RA 6300 to put the parameter settings into effect:

admin: q
annex# boot

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands