manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 51

A-23

Chapter 2    Configuring the Remote Annex 6300

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Book A

Using the CLI admin Command

Entering the Annex superuser CLI admin command puts you in
administrative mode. The admin prompt replaces the CLI prompt.
Pressing the attention key or typing quit at the admin prompt terminates
the admin session and returns you to the superuser CLI prompt.

The admin command functions only on the local RA 6300.

1.

At the CLI prompt, execute the su command and enter the
superuser password:

annex: su

password:

2.

At the superuser CLI prompt, execute the admin command:

annex# admin

ANNEX-PRI Rx.x, 32 async, 32 sync, 32 ta, 32 modem ports

admin:

3.

Execute the set annex command to change parameters. The
following sample command lines:

•

enable the DNS name server.

•

define two name server hosts.

•

enable security on the RA 6300.

admin: set annex name_server_1 dns

admin: set annex pref_name1_addr 192.9.200.95

admin: set annex name_server_2 dns

admin: set annex pref_name2_addr 192.9.200.85

admin: set annex enable_security Y

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands