manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 220

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 12    AppleTalk

A-192

Book A

Table A-21. Arguments for the arp Command

AppleTalk over ARA

AppleTalk over ARA allows Apple PowerBook and Macintosh
computers to communicate with one another or with an AppleTalk
network over standard telephone lines. An ARA user can dial into a
remote AppleTalk network and use all the available services as if that
user is physically connected to the network through EtherTalk.

Argument

Description

host

Displays the current ARP table entry for that host.

addr

Displays the current ARP table entry for that address.

–a

Displays all entries in the table.

–d

Deletes the entry specified with host.

–s

Creates an entry for the host, specified using either host or an
Internet address, at the hardware address specified using addr.
If you do not include temp or pub, the entry is permanent and
not published.

temp

The created entry is temporary and is to be deleted after 20
minutes. Temporary entries are not published.

pub

The created entry is to be published. The RA 6300 responds to
requests for the host’s hardware address.

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands