manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 25

xxv

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Preface

T

his manual is intended for the person responsible for installation,

configuration, and day-to-day administration of the Remote Annex 6300
(RA 6300) and/or the

Remote Annex 5393/PRI. (For brevity, the manual

usually refers only to the RA 6300.)

The RA 6300 operates in heterogeneous network environments providing
access for remote nodes to corporate LANs, the Internet via Internet
Service Providers (ISPs), and other networking resources through an
ISDN Primary Rate Interface (PRI) connection to the global telephone
network. The RA 6300 accepts connections from analog modems, ISDN
terminal adapters (TAs) using the V.120 Rate adaptation protocol, ISDN
NICs, and ISDN routers such as the Nautica Series Marlin and CLAM.

This manual assumes its readers have a basic familiarity with UNIX
systems and network administration in general and with the basic
concepts of Integrated Services Digital Network (ISDN). The host
operating systems referenced are versions of UNIX distributed by the
University of California at Berkeley, 4.2BSD and 4.3BSD, or versions of
System V.

Supported Platforms

This document supports the Remote Annex 6300 and the Remote Annex
5393/PRI.

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands