manualshive.com logo in svg

Bay Networks 6300, Supplement Manual

Share
Download
Bay Networks 6300 Supplement Manual Download Page 497

C-41

Chapter 2    Configuration Parameters

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Book C

arap_v42bis

This asynchronous port parameter enables V.42bis compression during
an AppleTalk session. A Y enables this parameter, an N disables it. The
default is Y.

at_guest

This asynchronous port parameter allows guests to log into an AppleTalk
session. When at_guest is enabled, if a client requests guest access, the
RA 6300 asks ACP for username guest privileges. A Y enables this
parameter, an N disables it. The default is N.

at_nodeid

This asynchronous port parameter defines the node ID hint used for an
ARA client during connection establishment. This parameter value is an
AppleTalk address in the form net.node. The valid net values are 0 to
65534. The valid node values are 0 to 254. The default is 0.0.

at_security

This asynchronous port parameter turns on ACP service for an AppleTalk
session on this port. When both at_security and enable_security are
enabled, the RA 6300 uses ACP to get security information about the
client, including authentication, logging, and zone access. If at_security
is not enabled, the RA 6300 uses only local security. A Y enables this
parameter, an N disables it. The default is N.

Summary of Contents for 6300


















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands